Covid Mouth Swab Test

Covid Mouth Swab Test

Covid Mouth Swab Test

Three key points for oral swab collection!

The oral swab is an all-in-one system that can collect, stabilize, transport and purify DNA from saliva in advance, providing a painless and risk-free new way to collect microbial DNA for disease control and prevention.

Accidentally, it is easy to cause people to be infected with the new coronavirus, and the surface detection is not sensitive, and the operation is easy to lead to standardized operation.

Awareness Check Tool:

Testing equipment for testing equipment, including testing tools for testing equipment, testing equipment for testing equipment, testing equipment for testing equipment, including safety testing equipment.

Virus Sampling Tube & Nasopharyngeal Swab (Inactivated)

Virus Sampling Tube & Nasopharyngeal Swab (Inactivated)

Oropharyngeal sampling points:

1. Sufficient light: Good lighting should be provided for both indoor and outdoor light sources. If necessary, flashlight lighting should also be provided.

2. Full exposure: The three anatomical locations for oropharyngeal swab collection must be completely exposed, and a spatula should be used when exposing bilateral tonsils.

3. Accurate location: The oropharyngeal swab should not touch other parts, such as the tongue, chin, etc., except for the three designated locations, so as not to be stained with saliva and affect the quality of specimen collection.

Covid Mouth Swab Test Pre-harvest preparation

Routine screening:

Work clothes, medical protective face shield, work cap, gloves, isolation gown, goggles (anti-fog) or face shield.

Influenza or suspected cases:

Wear work clothes, medical protective masks, work caps, gloves, isolation gowns or protective clothing, goggles (anti-fog) or protective face shields, and add shoe covers or boot covers if necessary.

Order of protective clothing:

Work caps that do not need to be worn. → Protective masks (Wearable head-mounted type and a tightness test should be performed after wearing them.)→ No shoes protective clothing (Boot covers should be added instead of foot protective clothing.) → Surgical gloves. → Protective screen or goggles.

Employee Registration Protection:

Tooling or isolation gown. → Medical-surgical mask or medical protective face shield. → Disposable work cap.

Protective clothing should be replaced every 4 hours and should be replaced in time if there is moisture or pollution.

Supplies preparation: Throat swab sampling sleeve, tongue depressor, inspection sheet and barcode, transport bag or refrigerator, 75% alcohol, pen.

Nucleic acid collection

1. We asked the examinee to tilt his head slightly, open his mouth.

And lift the upper jaw vertically to expose the posterior pharyngeal wall.

2. Use the front end of a sterile long cotton swab to quickly rub up and down 3-5 times on the bilateral pharyngeal tonsils.

And 3-5 times on the upper and lower sides of the posterior pharyngeal wall.

3. After scraping, open the sampling tube. Insert the front end of the sample vertically into the sampling tube. Insert the sampling tube. Break the sampling tube to expose the outer part of the tube. And tighten the cap.

Place the sampling tube in a biosafety sealed bag, mark the name and other information on the sampling tube, and complete the sampling.

Notice:

1. When sampling with the Covid Mouth Swab Test, it is best not to call “ah”, because once the sampled person is a positive patient, he will shout “ah”, exhale the virus in large quantities, and form aerosols in the sampling area.

When sampling, we advise patients to open their mouths and not yell or take deep breaths.

2. During the sampling process, one person collects and one person disinfects.

When the sampler holds the cotton swab, try to take it as far as possible.

3. A large number of samplers collect oropharyngeal swabs face-to-face with the sampled person.

Therefore, during the sampling process, the breath exhaled by the patient can easily and directly pose a great threat to the medical staff.

To reduce the risk of the sampler, we recommend that healthcare workers sample at a 45-60 degree angle to reduce risk.

End of Swab Test sampling

1. Spray and disinfect the generated medical waste layer by layer, and tie the gooseneck double medicine bag tightly to ensure that the seal is tight, has no damage, and has no leakage. Do not squeeze the contents of the medical waste bag. Annotation generates point information.

2. The order of unprotected items: hand hygiene → take off the protective face shield or goggles → hand hygiene → take off the protective clothing (take off the boot cover together) → hand hygiene, take off gloves, hand hygiene → take off the protective mask and Disposable work cap → hand hygiene.

Oropharyngeal Throat Swab Manufacturers

Oropharyngeal Throat Swab Manufacturers

Oral Swab Stick

Oropharyngeal Throat Swab Manufacturers

Name: Oropharyngeal swabs individually packaged

Contents: Oropharyngeal swab 150mm*1

Material: Cotton Swabs: Nylon Flocking Fiber

Swab stem: Medical grade plastic ABS handle

Availability: Can be paired with UTM/VTM

MOQ: 10,000 pieces

 

 

 

Product manual:

To ensure that the cotton swabs collect more samples, we replaced regular cotton swabs with the nylon flocking technology.

The ABS material used has a great effect on resistance.

Such materials have high-temperature resistance, high tensile strength, wear-resistance and low cost.

Oropharyngeal flocked swab size

Oropharyngeal flocked swab size

There is an obvious breakpoint about 3 cm in the front, which is convenient to be placed in the preservation solution for storage and transportation.

Description of Oropharyngeal Swab:

Wash your mouth before use and stop eating within half an hour.

Gently rotate 3-5 times in the oral cavity.

Throat swabs were removed from 3 cm.

Place a cotton swab into a test tube with Universal Delivery Medium.

Precautions:

Try it for one person only.
Do not open the package at will, so as not to pollute the environment.
To prevent cross-infection, use the swab carefully.

Flocked swab evaluation

Flocked Swab Evaluation: Virus Sampling Swab Material and Performance

Flocked Swab Evaluation: Virus Sampling Swab Material and Performance

Flocked swabs are the main test samples for PCR.

In the selection of raw materials, flocking glue plays a key role in the collection and release efficiency of swabs.

Whether to use high-quality water-based flocking glue is the main factor affecting the water absorption and hydrophilicity of fluff.

The experiment is to compare the sample collection effects of swabs flocked with different glues.

Preparation materials: Flocked swab, control group flocking swab, beaker, dye, water, balance, scale, vernier calliper.

1. The purpose of the experiment

The quality of incoming nasal swabs is guaranteed through the appearance inspection, size inspection and saturated liquid absorption inspection of the anterior nasal swab.

Flocked nasal swab

Flocked nasal swab

2 Sampling guidelines for flocked swab samples

2.1 Appearance inspection, the quality department conducts sampling according to scientific methods.

The quality personnel shall check whether the swab packaging bag is complete.

2.2 Visual inspection

1. Visually inspect the appearance of the swab to see that there is no lack of glue, no cracks, no deformation, no black spots and heterochromatic spots; (CR)

2. Visual inspection of the head: no damage, false soldering, missing soldering, black spots, looseness, dirt, scorch.

Visual inspection of the material: Compared with the swab sample, whether there is a difference in the material and thickness of the cotton tip of the swab.

2.3 Size check

The inspector carries out dimensional inspection according to the specifications of the material coding system.

2.4 Saturated suction volume

The inspector weighed the flocking cotton swab and recorded it as ml. Transfer it to a qualified preservation solution bottle 15 times. Weigh the swab again and record it as m2 and 0.11g ≤ m2-m1 ≤ 0.18g.

Remarks:

1. Definition of defect level: (MA) is a general defect mark; (MI) is a minor defect mark; (CR) is a serious defect mark.

Nasopharyngeal Swab Sample

Nasopharyngeal Swab Sample

Nasopharyngeal Swab Sample (Nasal Swab)

The nasopharyngeal swab: A specimen collection tool used to collect cell samples from the nasopharynx (above the throat).

When a patient develops an upper respiratory tract infection, doctors can use the collected samples to detect it, especially when the patient still has a fever.

In the experiment, technicians can detect common sources of infection, including potential pathogens such as the new crown and swine flu.

How is the COVID-19 nasal swab test performed?

how to collect swab sample

how to collect swab sample

Such tests can be uncomfortable for patients, but can quickly identify serious respiratory illnesses, especially those that require isolation or infection prevention measures to protect other patients.

Doctors can use cell cultures to determine the type of current infection. Factory-produced nasopharyngeal swabs cannot use natural substances such as cotton, as they may contain some impurities that will affect the detection.

Nasopharyngeal Swab materials

The nasopharyngeal swabs produced and sold by Cell Medical Company are flocked materials. Learn more about flocked swabs.

flocked swab

flocked swab

CellMedical flocked swabs are famous for their stable and reliable performance and excellent absorption and elution ability.

In general, a caregiver can place a sealed package (safety bag) next to the patient, and the caregiver places a sample container next to the patient, which contains a culture medium that maintains cellular and microbial viability for evaluation. This is the viral transport medium.

Laboratory technicians can detect the source of infection through nasopharyngeal swabs, and they should wear gloves and masks when collecting nasopharyngeal swabs.

Face protection is an effective measure to prevent patients from contracting respiratory diseases.

Nasopharyngeal swab collection

When taking the sample, gently insert the swab into the nose by hand, pushing it all the way to the nasopharynx. Patients often experience discomfort, convulsions, or spasms; for this, they sometimes need to suppress this response by leaning their heads against a wall or pillow.

When the nasopharyngeal swab is fully in, the caregiver can briefly swirl to collect the cell mixture, remove it, and place it in the specimen collection container. (Virus sampling tube)

After the sampler obtains the sample, he should immediately send it to the laboratory for PCR testing.

Waiting or not storing at low temperature may kill microorganisms that may be present in the sample, resulting in false-negative test results.

Patients usually get results within a day or two.

Inspection is capable of scanning for many common microorganisms.

When infectious diseases appear in epidemic areas, nasopharyngeal swabs and other microorganisms can be labelled to detect new crowns, swine flu and other microorganisms.

The doctor can try the test results to guide the patient’s treatment.

They can also help epidemiologists track the movement of diseases in the community, which is very useful for controlling disease outbreaks.


															
What is a Medical Swab

What is a Medical Swab

What is a Medical Swab

In the COVID-19 sampling, medical flocked swabs are the most commonly used testing method.

Application: oral mucosal cells, oral microorganisms, virus sampling and transportation, DNA/RNA collection, throat sampling, cervical sampling, nasopharyngeal sampling and other fields.

In addition, we can also use medical cotton swabs for the collection and transportation of DNA for paternity testing.

As well as the collection, preservation and transportation of flu specimens.

According to the material, medical swabs can be divided into cotton swabs, foam swabs, non-woven swabs, flocked swabs and other products. Among them, the market share of cotton swabs is higher, reaching 76%.

According to the application field, medical swabs include gynecological, cervical and vagina sampling swabs; oral, nose, and pharynx sampling swabs; laboratory test sampling swabs; virus and bacteria sampling; disposable sampling swabs; sterile cell sampling And other products.

However, due to the influence of new coronary pneumonia and the popularization of nucleic acid testing, the proportion of medical swabs used for specimen sampling is increasing.

With the continuous improvement of medical conditions in developing countries around the world, the application demand for medical swabs is on the rise.

In 2020, the global medical swab market will reach 400 million U.S. dollars, with an output of about 38.4 billion pieces.

Moreover, due to the development of the world economy, the price of medical cotton swabs has shown an upward trend.

Cell Medical swab

Cell Medical swab

Choose the right medical swab

Swabs are one of the most commonly used disposable devices in the medical industry. But how do you know which application to choose? We have put together a brief overview on how to choose the right medical swab for your specific needs.

Cotton swab

The tip of American pharmaceutical-grade spun cotton fiber has become the standard for applicators for all applications from basic patient care to crime scene investigation.

With strong water absorption capacity, softness, low cost and safety, the performance of the cotton swab is consistent and reliable.

However, it is generally not recommended to use cotton swabs for specimen collection.

why? The characteristics of this natural material prevent the sample from being effectively released, and the naturally occurring fatty acids in this material interfere with the processes used in microbiology and DNA extraction and have proven harmful to organisms.

Rayon cotton swab

"<yoastmark

Rayon is a synthetic fiber made from wood pulp.

Although classified as synthetic fiber, it is actually a natural material.

Unlike cotton, artificial fiber removes materials that may sample or react to samples for transportation and processing during the production process, so it is usually used to sample for diagnostic tests.

Polyester fiber swab

"<yoastmark

Swab head material adopts polyester filament winding.

Polyester fiber is used for microbial collection, rapid diagnosis and PCR detection.

The polyester scraper has a higher release rate, but its cost is higher than cotton swab and rayon swab.

Foam tip swab:

Foam swab

Foam swab

The swab made of medical polyurethane is a very good diagnostic material, especially suitable for cell sampling.

The number of holes on the surface is generally 100 PPI (holes per inch).

This material has good hydrophilicity and poor absorption of hydrophobic substances.

Used in occasions where resistance to chemical corrosion is required, and it is also used for DNA and microbial sampling.

Synthetic swabs (rayon and polyester) are used to collect bacterial culture specimens, rather than cotton swabs that may contain inhibitory or toxic substances.

Flocked swab:

flocked swabs

flocked swabs

First developed flocking technology for cosmetics and industrial production.

Because of the planting process and the use of multi-head bifurcated polyester fiber materials.

The flocked swab has a very high absorption and release rate, and it is also effective for molecular sampling and absorption.

Some institutions designate to conduct research on nucleic acid sampling and certain genome analyses.

At present, the development of swabs not only reflects the changes in the materials of sampling swabs, but new demands in the fields of nursing, testing, and scientific research have led to the multi-dimensional development of swabs.

COVID-19 Saliva Collection Kit

How accurate are saliva swab DNA tests?

Is the DNA test of the saliva swab accurate?

Many people doubt the accuracy of the saliva swab test.

However, you can rest assured, because the accuracy of oral saliva swab testing is as accurate as other DNA testing methods.

Moreover, this is not the same as a finger puncture or a blood test, it is not painful at all.

In recent years, DNA testing has become more and more popular.

Whether you want to confirm your parental relationship, understand where your genes come from or want to optimize your exercise.

We are currently working on direct-to-consumer DNA testing of saliva swabs.

You have decided to use DNA testing to better understand your body and optimize your training.

However, before you take the first step and buy a set of home DNA testing kits, you should have some concerns.

Although most of the feedback and research has been confirmed to be positive, we are here to learn more about this and help you make an informed decision.

How much saliva is needed for a DNA test?

Saliva Sample Collection Kit :Disposable saliva DNA RNA sampling tube

Saliva Sample Collection Kit: Disposable saliva DNA RNA sampling tube

2ml-4ml.

The saliva collection components are easy to use, and each set has detailed instructions.

You can provide samples for different health conditions, including common medications used during pregnancy, colds or flu (including medications for acid reflux or heartburn).

But if you want to use drugs to reduce the white blood cell count, such as chemotherapy, you’d better wait two weeks or wait until the white blood cell count returns to normal.

After mixing with DNA stabilizing buffer, the temperature range of your saliva sample (-4oF to 122oF) is stable.

Please send the collected samples to the laboratory as soon as possible.

Is the DNA test at home accurate?

Yes, DNA testing at home is very accurate.

You will only encounter errors when the genetic sample is damaged (for example, you have eaten before the sample is collected) or the laboratory quality is poor.

Therefore, it is necessary to choose a well-known DNA testing supplier for testing.

An accurate genetic test report can know in advance whether the body is in danger of disease.

By improving the living environment and behaviour habits, avoiding or delaying the occurrence of the disease, or determining whether there is a specific drug in the case of malignant disease.

Target, so as to more accurately select the treatment method.

The results in each report are derived from at least three peer-reviewed research papers.

It just repeats the genes that have an impact on health, health and nutrition.

This means that you can change the way of real-life based on the genetic variants you carry.

Through strict internal and external procedures, we have passed ISO27001 certification to identify risks, evaluate all control systems, improve our reliability and security, and comply with international data security standards, so as to ensure that our customers and business partners can trust us.

What can you do to ensure that your DNA test results are accurate?

In order to ensure that your DNA test results are accurate, you need to follow the instructions at the back of the box.

Before starting, please read the instructions carefully:

Before wiping dry, make sure you have nothing to eat or drink.

-The best time to take the exam is to brush your teeth in the morning and the first thing before drinking the first cup of tea.
Before taking the test, it is best to open the sealed mouth swab to ensure that it will not be affected.

After removing the cotton swab, open your mouth and use a pointed tip (cotton swab, slightly larger) to gently wipe your cheeks.

Try not to scrub vigorously, because the important part of the sample is saliva.

Be sure not to put paper towels in the plastic container provided.

Take care to break the pole where it is needed.

Fill out the attachments, sign and seal the enclosed envelope, and then send it to the laboratory for inspection.

Bear with patience and watch your test. This process will start with the receipt of samples in the laboratory and will take 10-14 days.

Is the accuracy of mouth swab detection relative to other DNA collection methods?

Because the saliva swab is noninvasive, many people question its accuracy.

However, you can rest assured that the accuracy of oral swab detection is as accurate as other DNA detection methods. And, unlike finger punctures or blood tests, it doesn’t hurt at all.

Whether you are building a cabinet in IKEA, pressing a map or doing DNA testing, you can get accurate results as long as you follow the instructions.

Remember, DNA testing is wrong only if your test results are wrong or you don’t follow the instructions.

Cost is an important factor in performing such tests, so it must be studied.

Often, you don’t just pay for the test suite. You also have to pay a test fee to analyze your results. If the test you selected does not belong to the laboratory, please choose a supplier with a good reputation and excellent laboratory.

Every laboratory we use will conduct regular spot checks to ensure that your samples have been tested correctly and your results are 100%.

 

 

Hanks Transport Media

Hanks Transport Media

Hanks Transport Media.

Features:

  •  The components of the inactivated virus transport medium: Hanks solution, antibiotics, BSA, cryoprotectants, biological buffers, amino acids, inactivators and RNA protectors. Which inactivate virus samples and protect RNA from degradation.
  • A combination of multiple antibiotics is used in the virus transport medium to effectively prevent bacterial and fungal contamination.
  • The addition of bovine serum albumin (BSA) as a protein stabilizer to the virus delivery medium can protect the virus sample and increase the separation rate.
  • Thickening and anti-leakage design to ensure that the sample does not leak, in line with WHO regulations and biosafety regulations.
Hanks Transport Media VTM KITS

Hanks Transport Media VTM KITS

Hanks Transport Media(VTM)application:

Used for the collection and transportation of clinical influenza, avian influenza, hand-foot-mouth disease, measles and other virus specimens and mycoplasma, ureaplasma, chlamydia and other specimens.

  • Before sampling, indicate the sample information on the label;
  • According to different experimental purposes, use sampling swabs to sample the corresponding parts;
  • After sampling, quickly put the swab into the sampling tube of the virus-containing transport medium, break it at the breaking point, and tighten the tube cap;
  •  Freshly collected specimens can be transported to the laboratory at room temperature (5-25°C), and ice packs will be more effective when transported.
  • Specimens used for nucleic acid testing should be tested as soon as possible.

The specific sampling method is as follows:

How to use nasal swab & thoat swab

How to use nasal swab & throat swab

a) Nasal swab: Gently insert the swab head into the nasal palate in the nasal passage, stay for a while and then slowly rotate and exit. Swab the other nostril with another swab, immerse the swab head in the sampling solution, break it at the breaking point, and discard it. (Suitable for sampling with this product)

b) Throat swab: Use the swab to wipe the bilateral pharyngeal tonsils and posterior wall of the pharynx, and immerse the swab head in the sampling solution and discard it. (Suitable for sampling with this product).

  •  This product is for in vitro diagnostic use only.
  •  The liquid in the sampling tube is the transport medium, and the sampling swab cannot be dipped into it before sampling.
  • The discarded sample collection fluid should be sterilized.
  • If it is found that the delivery medium is out of date, the liquid is discoloured, turbid, or leaks. Prohibited to use it.
Virus transport medium OR VTM kits

Virus transport medium OR VTM kits

Ordering Information:

Item No. Model Describe Specification
VTM-B-CM040320S VTM-B(Inactivated) 2With Nasal Swab& Throat Swab;  3ml inactivated medium;10ml tube 3mL/piece, 50 pcs/box
VTM-B-CM040311S Virus transport medium set (1 inactivated virus sampling tube, containing 3mL delivery medium, 1 supporting single-packed nasopharyngeal swab) 3mL/piece, 50 pcs/box
VTM-B-CM040312S Virus transport medium set (1 inactivated virus sampling tube, containing 3mL delivery medium, and 1 oropharyngeal swab in a single package) 3mL/piece, 50 pcs/box
VTM-B-CM0424 Virus transport medium 50 virus inactivation sampling tubes, containing 3mL transport medium,10ml tube. 3mL/piece, 50 pcs/box
VTM-B-CM0425 Virus transport medium 20 virus inactivation sampling tubes, containing 3mL transport medium. 3mL/piece, 20 pcs/box