Tag Archives: Flocked Swab Influenza

Nasal Swab Covid Test

Nasal Swab Covid Test

Posted on by

Nasal Swab Covid Test

Some people need to be tested for COVID-19 with a quick swab.

The pros are sure: If it is possible for you to test both the nose and the throat at the same time.

Officially, the FDA follows inspection guidelines. Simply put, observe the subtests consistently during this period.

COVID19 test flocked swabs to exteriors.

What is a nasal swab?

COVID Swab test

COVID Swab test

A nasal swab is a test that checks for viruses in the nasal cavity, and the result is a test that checks the nasal cavity by a method.

Because of rhinitis in the nasal cavity, sinusitis, sinusitis, nasal cavity in the nasal cavity and other problems.

There are several respiratory infections, including the flu, COVID-19. A nasal swab can help your doctor determine the type of infection you have and which treatment is definitely best for you.

The test can be done by taking a sample of cells from your nostrils or nasopharynx.

A nasopharyngeal flocked swab is the uppermost part of the nose and throat.

Other names: Anterior nostril examination, turbinate swab, NMT swab, nasopharyngeal culture, nasopharyngeal swab

Why do I need a nasal swab?

01The positive detection rate of nasal swabs is higher.

When using a throat swab to detect the new coronavirus, the base of the tongue will instinctively prevent the cotton swab from going deep, and the cotton swab is not easy to reach the back wall of the pharynx. . The nasal swab is easier to reach the tested site and can stay in the nasopharynx for a long time, and the test results are more accurate. Students returning to school from the north and south of the river and by various means of transportation require us to improve the accuracy of testing in a responsible attitude to everyone’s health.

02Nasal swabs are safer for nucleic acid collection personnel.

During the nasal swab test, the tested person needs to wear a mask with only the nostrils exposed; while for the throat swab test, the tested person needs to open his mouth wide, and the exposed area is large. If the tested person coughs and retches, the nucleic acid tester may face a greater risk of infection. Once the testers are infected, the risk may spread to a wider range of people.

03 Throat swabs may be more uncomfortable than nasal swabs.

Throat swabs are collected across the base of the tongue to the posterior pharyngeal wall, tonsillar recesses, sidewalls, etc., and repeatedly wiped 3 to 5 times to collect mucosal cells. In response, nasal swabs were relatively less irritating to the mucosa.

The entire nasopharyngeal swab process:

What to do before swab test

nasopharyngeal swab

You will throw your head back.
Your healthcare provider will insert the swab directly into your nostril until it reaches your nasopharynx (the top of your throat).
Your supplier will rotate the swab and remove it.
Do I need to do any preparation for the exam?
For nasal swabs, you don’t need any kind of special preparation.

 

Viral Transport Medium Tube

Viral Transport Medium Tube

Posted on by

Viral Transport Medium Tube

A virus sampling tube is a product used to collect and transport infectious disease specimens. It is not a single product, but a set consisting of a sampling flocked swab, Viral Transport Medium and a plastic tube. Sampling process: use a swab to sample the patient, but the preservation solution into a plastic tube, put the sample into the plastic tube preservation solution, and transport the preserved sample to the laboratory for testing.

Special instructions for virus sampling tubes:

If the collected sample is used to detect viral nucleic acid, it must be used with a nucleic acid extraction kit and nucleic acid detection reagent; if it is used for virus isolation, it must be combined with a cell culture medium.

Different application fields have different requirements on the volume of sampling liquid, please replace the corresponding product according to the prompts in the sequence information:

Viral sampling tubes that collect viral samples from clinical patients generally require less fluid.

For a collection of single-use virus sampling tubes and short-term delivery of influenza virus from the external environment. We typically require a liquid volume of 3 to 6 ml.

Virus sampling tubes have three requirements, including transport, storage, and sample usefulness.

Transportation, ensure that the samples do not leak during transportation;

Preservation, ensure that the sample does not leak during the preservation process;

In terms of the usefulness of the sample, the sampling tube itself does not have a toxic effect on the sample, so as not to affect the material collected in the sampling tube, which in turn affects the test results.

What is vtm kits?

Viral Transport Medium Tube

Viral Transport Medium Tube

Cell medical (Dongguan) Co., Ltd.’s disposable nasopharyngeal VTM sampling kit is a nasopharyngeal swab sample collection for COVID-19 detection. The kit contains a virus transport medium (VTM) for nucleic acid detection and virus culture. It can be stored at room temperature before collection and should be stored at 2-8°C after collection to avoid the growth of contaminants.

VTM

Viral Transport Medium includes Hanks’ Balanced Salt Solution, fetal bovine serum, antibacterial antibiotics, antifungal antibiotics. And phenol red as indicators for real-time monitoring of solution pH stability.

It is not a single product, but a set consisting of a sampling flocked swab, Viral Transport Medium and a plastic tube.

Flocked swab

The supplied sterile nasopharyngeal swab has a flocked tip with a breakpoint at 80mm of the tip, compatible with the supplied tubing. The cap design is very effective in containing the VTM and preventing sample leakage.

Viral Transport Medium kits Specifications

Specifications
1 nasal flocking sampling swab + 1 bottle of 10ml preservation solution, containing 3ml liquid
Liquid Volume:
1mL/2mL/3mL/5mL

Click here to learn more.

Flocked Swab Use | Flocked Swabs Provide Superior Specimen Collection

Flocked Swab Use | Flocked Swabs Provide Superior Specimen Collection

Posted on by

Flocked Swabs Provide Superior Specimen Collection.

1. Flocked swabs provide an optimal sampling.

"<yoastmark

Flocked swabs are the best choice for rapid diagnosis and testing, as they allow the better collection of cells or organisms and rapid release of whole cells at the point of collection.

2. Enhance diagnostic sensitivity.

Cell medical flocking technology, Made with nylon short-fibre fleece and medical-grade ABS plastic rods, collects and releases 3 times the number of samples compared to traditional swabs. Creates hundreds of thousands of contacts for superior sample collection and release point. The increased number of target cells (compared to non-flocked swabs) helps improve the sensitivity of rapid diagnostics and tests.

3. Rapid elution.

The flocked swab is fully integrated with the handle to collect and retain more samples. Not only does this provide better sample yield, but it also allows for faster and more complete release of the sample into the liquid medium.
Looking for more? Compare nasopharyngeal and throat swabs here.

4. Proprietary multi-length flocking fibers.

cellmedical isn’t the only medical product supplier offering flocked swabs. But we are a company that makes flocked swabs using multi-length flocked fibers. Unique multi-length flocked fibers create a mesh structure that collects and retains more samples than traditional cotton, polyester or rayon swabs.

Comparing swab tip materials? Check out this guide.

5. It is convenient for loading, unloading and transportation.

Our flocked swabs offer preformed breakpoints so you can easily disconnect the handle before attaching the cap to the vial. Sterile flocked swabs can be used for dry shipping and medium-fill shipping. After sampling, simply replace the tube top for trouble-free transport. Click the image below for a free sample, or contact us for more information.

Nylon Flocked Swabs

Nylon Flocked Swabs

Posted on by

During an outbreak, everyone should be familiar with sampling swabs. When doing nucleic acid, touching the nose and throat is directly touching the sampling site of human organs, that is, directly touching our human organs. Therefore, the material of the sampling head will affect our comfort and is closely related to the subsequent detection.

On This Page

What is a Nylon flocked swab?

About sampling swab material.

What are the types of swab tests?

Nylon flock swab

Sampling swabs should be polyester, nylon and other non-cotton, non-calcium alginate swabs, and the handle should be non-wood. The breakpoint is located about 3cm from the top of the swab head, which is easy to break.

NASAL FLOCKED SWAB

NASAL FLOCKED SWAB

Moreover, the experimental analysis shows that the extraction efficiency of nylon flocked swabs is the highest. In contrast, the recovery efficiency of nylon flocking swabs is also higher than that of other material swabs.

Nylon fibre flocking technology. The front end is coated with vertically fixed nylon short fibers, so that the entire sampling area of ​​the sampling swab has no absorption holes, and the sampling sample will not be scattered in the fibers, which is conducive to faster and more efficient sampling!

Compared with traditional winding swabs, nylon flocking swabs collect and release 3 times the number of samples, do not damage cell samples, ensure the survival rate of cell samples, do not leave fatty acids, do not affect the test and detection results, not to mention Said to cause harm to the human body.

What materials cannot be used for sampling swabs?

As we all know, the materials of medical swabs have always attracted much attention. After all, medical swabs come into direct contact with the skin. People who touch the skin can first touch alcohol for disinfection, that’s fine, but what about those who have direct contact with organs? For example, the throat swab we are most familiar with during the epidemic.

The throat swab is in direct contact with the sampling site, and the material of the sampling head is closely related to subsequent testing. The sampling swab head should be made of nylon flocked swabs or rayon, and calcium alginate sponges or wooden stick swabs (including bamboo sticks) should not be used.

Cotton products should not be used for the swab head, because the cotton fiber has strong adsorption to protein and is not easy to clean into the subsequent storage solution; wooden.

What are the types of swab tests?

There are two different types of COVID tests – Swab tests and antibody tests.

1. Swab tests can show if you have an active coronavirus infection and should take steps to isolate or isolate yourself from others. There are currently two types of diagnostic tests – molecular (RT-PCR) tests that detect the genetic material of the virus, and antigenic tests that detect specific proteins on the surface of the virus. Samples are usually collected with a nasal or throat swab, or saliva spits into a test tube.

2. Antibody tests look for antibodies that the immune system produces in response to a threat, such as a specific virus. Antibodies can help fight infection. Antibodies can take days or weeks to develop after infection and may remain in the blood for several weeks after recovery.

Therefore, antibody tests should not be used to diagnose active coronavirus infection.

Right now, researchers don’t know whether the presence of antibodies means you’ll be immune to the coronavirus in the future. While there is a lot of uncertainty surrounding this new virus, the widespread availability of antibody testing and clinical follow-up over time also has the potential to provide the medical community with more information about whether and how long a person has recovered from the virus of people have a reduced risk of infection if they are re-exposed to the virus. Learn more about antibody testing.

Flu Swab Test

Flu Swab Test

Posted on by
Influenza, commonly known as influenza, is an acute respiratory disease caused by influenza A, B, and C viruses, and belongs to Class C infectious diseases. Influenza is an illness that spreads relatively easily from person to person and can infect large numbers of people. While most people recover quickly from the flu, some, such as older adults, are at risk of serious illness and even death.

Flu Swab Test

Influenza viruses come in many different forms. A flu swab is a method of taking a sample from a person. Medical staff check patients for flu. If so, what kind of flu virus can be spread by inhalation through the nose and throat of an infected person.
When the flu virus infects a person, it spreads through the respiratory tract. The nose and throat are where the virus lives and grows, causing symptoms such as a runny nose, sore throat and cough. These places are also the easiest places for doctors to obtain samples. As a result, doctors can often use flu swabs to determine whether a patient has the flu, which often spreads quickly in a population.
Due to public health, some government medical agencies may wish to track the spread of the disease. Since influenza viruses also mutate rapidly, new influenza viruses are produced regularly. The type of flu a person has can also be important information for the public health system.
Finally, a doctor may need to determine whether a person has the flu so an appropriate treatment plan can be instituted. There are several ways a doctor can use a swab to determine if a patient has the flu virus. An area of ​​medical professionals, usually to test for microbes. (Nasal swab for flu)

How to do Nasal Swabbing for COVID

A sampler is doing a swab test for a woman

How to Swab for the Flu?

They usually have a long swab stick with a soft swab tip at the end, made of cotton material, polyester, polyester or rayon tip, nylon flocked swabs. is sterile, so the test only analyzes the microbes in the sampled area. During the flu swab procedure, doctors usually insert the end of the swab into the patient’s nose and spin the flu swab to collect as much mucus as possible.
A doctor can take a sample by inserting a swab into the top of the throat through the nose. If the virus grows heavily in the area, the flu can cause dizziness.
Doctors have several different ways to test a cotton swab for the flu virus. The test that takes a few days to a week to complete is a viral culture, in which viral particles are grown in human cells.
Rapid tests include tests that analyze the sample for the presence of genetic material or antigens from the flu virus. An antigen is a special molecule in a virus. Some commercial tests contain antibodies, and the presence of antigens can be recognized by their linkage to the antigens.
These tests are less than an hour, but may not be as accurate as viral cultures. A runny nose and sore throat can be symptoms of the flu.

How do I know if I have the flu?

If you have a fever, cough, sore throat, runny or stuffy nose, body aches, headache, cold and/or fatigue, your respiratory illness may be the flu (flu). Some people may experience vomiting and diarrhea, although this is more common in children. People can get the flu without having a fever. Influenza viruses usually cause the most illness during the colder months of the year. However, the flu can also occur outside of a typical flu season. In addition, other viruses can cause flu-like respiratory illnesses. Therefore, it is not possible to tell if you have the flu based on symptoms alone. If your doctor needs to determine if you have the flu, you can do laboratory tests.

Can I get the flu and COVID-19 at the same time?

Yes. Co-infection with influenza and other respiratory illnesses, including COVID-19, is possible. Health experts are still studying how common the condition is.

The flu is similar to some of the symptoms of COVID-19, so it’s hard to tell them apart based on symptoms alone. The swab diagnostic test helps determine if you have the flu, COVID-19 or other respiratory infections.

 

Virus Transport Medium Composition

Virus Transport Medium Composition

Posted on by

VTM Transport Medium

Transportation Medium Specifications

2.0ml, 3.0ml, 4.0ml, 5.0ml, 6.0ml.

Application

For transport storage of clinically collected samples.

Virus Transport Medium kits

Virus Transport Medium kits

Virus Transport Medium Composition

Hank’s balanced salt builds a neutral environment; bovine serum albumin as a protein stabilizer and Hank’s balanced salt increase the survival time and infection stability of the virus; antibiotics have broad-spectrum antibacterial effects; acid-base indicator, pH 6.6 in the discoloured area (yellow) to 8.0 (red), red at pH 7.2 to 7.4.

Storage condition: 4-25℃ Validity period: 12 months.

How to use VTM Kits?

1. According to the sampling requirements, use a sampling swab to collect samples.

2. Place the sampling swab after sample collection into a sterile sampling tube. 3. Break the swab at the breaking point of the sampling swab rod and discard the tail. 4. Tighten the cap of the sterile sampling tube.

5. Label the sterile sampling tube with information as required.

6. Specimens should be transported to the corresponding influenza surveillance network laboratory within 2 working days after collection, and the storage temperature should be 2-8°C; Save and ensure that the collected specimens are sent to the corresponding network laboratory within 1 week. Specimens should avoid repeated freezing and thawing.

how to use flocked swabs

how to use flocked swabs

7. For specific sampling methods, please refer to the following:

1) Throat swab specimen: Use a special sampling swab to wipe the posterior wall of the pharynx and the tonsils on both sides with moderate force, avoiding touching the tongue; quickly immerse the swab head in the sampling solution, and it is easy to break at the sampling swab rod. The swab is broken at the cut-off point and the tail is discarded. (Applicable to this product sampling)

2) Nasal swab specimen: use a special sampling swab, gently insert the swab head into the nasal palate, stay for a while and then slowly turn it to exit; quickly immerse the swab head in the sampling solution, and the swab head is easy to remove in the sampling swab rod. Break the swab at the cutoff point and discard the tail. (Applicable to this product sampling)

The Mission of A Virus Test Swab

The Mission of A Virus Test Swab

Posted on by

The Mission of A Virus Test Swab

From the sampling point to the testing room, then to the temporary storage point of medical waste.

Then to the hazardous waste centre, to the power plant, and finally to the soil.

A swab for nucleic acid detection completed the task and became a piece of pollution-free ash and fill it in the soil.

At present, we are in a critical period of anti-epidemic.

An ordinary hospital has a maximum of 11,220 samples per day at a single sampling point.

The Mission of A Virus Test Swab

The Mission of A Virus Test Swab

At nine o’clock in the morning, at the nucleic acid testing and sampling service point, citizens who were ready to test lined up.

Everyone wears a mask and consciously separates one meter from each other.

At the beginning of the inspection window, the heavily armed nurses washed their hands with an antiseptic solution.

And then removed a flocked swab about 15 cm long from the packaging bag to take a sample before taking the throat swab.

The nurse opened the collector’s mouth wide, and she skillfully inserted the flocked swab into her pharynx.

Then picked up a sampling tube (virus transport medium) with her left hand. And inserted the collection stick into the sampling tube with her right.

With a little force, the tip of the cotton swab breaks enters the sampling tube, seals it. And throws the long stick into the yellow medical waste bin.

As a testing point for ordinary citizens and inpatients, as an ordinary citizen and inpatients, the use of cotton swabs in an ordinary hospital reached 11,220.

Medical waste treatment forms closed-loop management in nucleic acid testing laboratories.

Take the flocked swab, put the swab head into the sampling tube, and paste a barcode similar to “ID card”. And carefully seal it, put it into a transparent sealed box.

And then send it to the transfer cabin of the PCR laboratory of the Department of Infectious Diseases by staff wearing protective clothing.

The PCR laboratory is under negative pressure, and after the virus enters, it cannot come out. After the outbreak, the PCR laboratory strictly abides by the medical waste treatment process, forming closed-loop management of the laboratory.

An hour later, staff in protective suits transported medical waste out of the ward in sealed yellow bags and sealed with “extremely infectious waste”.

Then, the workers send these medical wastes by trolleys to the medical waste temporary storage area at the nucleic acid collection point 100 meters away. For the medical wastes for nucleic acid testing, he transports an average of about 35 kilograms per day.

We need to place the virus sampling tube for 48 hours during the transfer process

Except for professionals, our PCR laboratory does not allow patients and the public to enter here.

To ensure safety, all medical waste from nucleic acid testing collection points, including swab sticks, is kept here for 48 hours.

After our test results come out and are confirmed to be correct, they will be sent to the hazardous waste treatment centre by a medical waste transfer vehicle.

At ten o’clock in the morning, the staff of the hazardous waste centre arrived at the scene. Unload the empty shipping box and load the ship with medical waste that has been sitting for 48 hours.

The sampling flocked swabs used must be incinerated at high temperatures above 1100°C.

There are two buildings, an incineration workshop and a cooking room, in the yard of the Hazardous Waste Center.

The staff in protective suits skillfully unload boxes of medical waste from the transfer vehicle and load boxes of hazardous waste into bucket elevators.

 

What is Pooled Sample?

What is Pooled Sample Test?

Posted on by

Pooled Sample Test?

With the 2019 coronavirus disease (COVID-19) pandemic, doing a good job in viral nucleic acid detection is the top priority. However, detection of the virus is still limited due to resource constraints. Pooled sample testing offers a way to significantly improve testing power.

“mixed nucleic acid test”  or “Pooled Sample Test”, referred to as “mixed test”.

Which means that two or more samples are mixed and tested. method for positive samples.

     What is the difference between the “mixed collection” of community nucleic acid testing and the “single collection” of the hospital?

    Why do community streets adopt the mixed mining model?

    Under what circumstances should I test individually?

What is pooled COVID testing?

The so-called “mixed detection” of nucleic acid.

Takes throat swab samples from multiple people and puts them together for viral nucleic acid detection.

Pooled Sample Test VTM Kits

Pooled Sample Test VTM Kits

In fact, Medical use of Pooled Samples is common.

In blood collection systems such as apheresis stations.

We use pooled samples to detect the presence of infectious disease antigens and antibodies in pooled samples of multiple people.

There are two modes of “mixed detection”. One is to sample several people, such as 3 or 5 people and put them into the same sampling tube.

The other is to mix samples of the same volume from 3 or 5 people during laboratory testing, also known as “sample mixing”.

From a scientific point of view, the first “mixed sampling” mode will not affect the sensitivity of nucleic acid detection. While the latter mode of mixed detection of samples has a certain impact on the sensitivity of the detection,  the degree of impact is controllable.

In order to detect high-risk groups, such as symptomatic patients and close contacts in fever clinics, we still recommend separate sampling.

For screening of low-risk groups, pooled sample test is our first choice.

Is the mixed detection technology reliable?

Is the “five-in-one” and “ten-in-one” mixed mining detection technology reliable?

“The size of the single-collection tube and the mixed-collection tube are different, and the amount of the preservation solution is also different.

Based on the results of a large number of basic experimental research and practical operations in the previous period.

The increase in the volume of the mixed-collection preservation solution has no effect on the detection results of weakly positive specimens.”

In the case of an extremely low positive rate, the 10-in-1 mixed detection technology is very efficient.

The FDA is aware that there is a great interest in performing testing using pooled samples.

This approach increases the number of individuals who can be tested with the same amount of resources.

What are the benefits of mixed nucleic acid detection?

The hybrid detection of nucleic acid has greatly improved the nucleic acid detection capability, reduced the burden of personal testing costs, and did not affect the time for issuing the test report.

The testing time of a single test and mixed test laboratory is the same, but compared with a single test, the mixed test is more suitable for mass and group screening.

In the case of small-scale outbreaks, the use of mixed detection can improve efficiency, play the role of multiple screening, early diagnosis, reduce transmission, and save social costs.

Whether the population is suitable for mixed testing shall be carried out in accordance with the requirements of the provincial and municipal epidemic prevention and control headquarters,

The medical institutions carrying out the testing must follow the technical requirements and standards of the municipal health department.

Which groups recommend the single purchase and single inspection?

It is worth mentioning that single sampling and single inspection are recommended for specific populations.

The above notice specifically mentioned that COVID-19 nucleic acid 10 in 1 and 5 in one mixed detection technology is suitable for large-scale rapid screening of the low-risk populations, and is more suitable when the overall positive rate of population is low (0.1%).

However, for the detection of high-risk groups such as symptomatic patients, close contacts and people in key areas in fever clinics.

Recommended to adopt single sampling and single detection.

What should I pay attention to when doing pooled sample detection?

1. When going to the testing point for nucleic acid testing, wear a mask, and it is best to prepare one or two spare masks.

2. Two hours before the swab test, it is recommended not to eat to avoid vomiting during the test.

3. When waiting for the test, remember to keep a distance of more than one meter between the front and rear personnel to avoid close contact.

4. Whether it is doing swab testing or getting the report, it needs to be certified as one, so be sure to bring ID cards, receipts and other materials, so as to avoid incomplete materials at that time, which will affect the testing and reporting.

Covid-Nucleic-Acid-Test

Covid Nucleic Acid Test Nasopharyngeal Swab Test

Posted on by

This article
To talk to you in detail
Covid nucleic acid test!

But in the face of the “nucleic acid swab test”
This unfamiliar and familiar word
Do you have many questions?

Image source network

Do you want to do a nucleic acid test when you go back?

Will it be difficult to make an appointment for nucleic acid testing?

How long does it take to get the results of a nucleic acid test at the hospital?

Should I Swab My Throat or Nose for Rapid COVID-19 Tests?

To answer your questions.
Today.
I’m going to tell you.
Those things about nucleic acid testing.

01. What is nucleic acid detection?

At present, nucleic acid detection is the main method for laboratory diagnosis to determine whether a patient is infected with the new coronavirus. It can achieve early detection, early diagnosis, and early treatment. Real-time fluorescent PCR can be used to detect throat swabs, sputum or blood samples. to covid nucleic acid, or detected by viral next-generation gene sequencing.

simply put

Nucleic acid testing is done by

After collecting human secretions

Tested by the instrument

to see if we have the new coronavirus in our body

If so, the test result is positive

On the contrary, if it doesn’t, it’s negative.

02. How to test the COVID swab?

“Sir, oropharyngeal swab, nasopharyngeal swab, and anal swab, which one to choose?”

How do you do a nasopharyngeal swab?

Nasopharyngeal swabs must be performed with the patient sitting upright with the head in an upright position, as this allows for easy visualization and access to the nasal floor perpendicular to the central axis of the patient’s face.

Flocked Tip Swab Nylon Sterile Nasal Swab Stick

Flocked Tip Swab Nylon Sterile Nasal Swab Stick

Insert the swab into the patient’s nose and align it parallel to the nose and the base of the septum. As long as there is no obstruction in the nasal cavity, the swab continues to move in this direction until it reaches the nasopharynx, at which point the tester feels resistance.

Once the swab reaches the nasopharynx, a gentle rotation and two complete 360-degree rotations are recommended to allow secretions from this area to be absorbed.

Once the swab is removed from the patient’s nose, it is immediately inserted into a viral sample containing a viral transport medium. The handle of the swab extending through the opening of the vial was broken off to allow the tube to be closed.

So
Now that there are oropharyngeal swabs and nasopharyngeal swabs
Why add anal swabs?
To answer your questions
Let’s take a look at their respective advantages and disadvantages

The specific operation of the anal swab is as follows:

Soak a flocked swab in saline, insert it 2-3 cm into the anus, wipe from the folds around the anus, or rotate it gently inside the anus, and insert it into a test tube containing saline.

anal swabs

For fecal swab cultures, all of the above requires the use of sterile equipment and placing the swab in a sterile tube.

So
Now that there are oropharyngeal swabs and nasopharyngeal swabs
Why add anal swabs?
To answer your questions.
Let’s take a look at their respective advantages and disadvantages.

Oropharyngeal swab: relatively simple to operate, less irritating, suitable for large-scale screening. Therefore, the nucleic acid test of oropharyngeal swabs is mainly used in the screening of new coronary pneumonia for the epidemic-related population, which is used in the routine nucleic acid test clinic of the First Affiliated Hospital of NTU.

Nasopharyngeal swab: The technical requirements are high, the human body does not feel comfortable, and the accuracy rate is higher than that of the oropharyngeal swab. However, for some asymptomatic or mildly infected people, the condition recovers quickly after infection, and the pharyngeal nucleic acid may not be detected in 3 to 5 days.

Anal swab: high accuracy, reduce missed diagnosis. The study found that the duration of nucleic acid-positive feces or anal swabs of some infected persons is longer than that of the upper respiratory tract. Therefore, anal swab tests will be carried out for key groups such as isolation points or some imported overseas.

In conclusion.
The three swabs have different lengths.
If you have to test an anal swab.
Don’t be shy.
Whatever the swab,
It is a good swab that can accurately identify the virus.

 
Covid Mouth Swab Test

Covid Mouth Swab Test

Posted on by

Covid Mouth Swab Test

Three key points for oral swab collection!

The oral swab is an all-in-one system that can collect, stabilize, transport and purify DNA from saliva in advance, providing a painless and risk-free new way to collect microbial DNA for disease control and prevention.

Accidentally, it is easy to cause people to be infected with the new coronavirus, and the surface detection is not sensitive, and the operation is easy to lead to standardized operation.

Awareness Check Tool:

Testing equipment for testing equipment, including testing tools for testing equipment, testing equipment for testing equipment, testing equipment for testing equipment, including safety testing equipment.

Virus Sampling Tube & Nasopharyngeal Swab (Inactivated)

Virus Sampling Tube & Nasopharyngeal Swab (Inactivated)

Oropharyngeal sampling points:

1. Sufficient light: Good lighting should be provided for both indoor and outdoor light sources. If necessary, flashlight lighting should also be provided.

2. Full exposure: The three anatomical locations for oropharyngeal swab collection must be completely exposed, and a spatula should be used when exposing bilateral tonsils.

3. Accurate location: The oropharyngeal swab should not touch other parts, such as the tongue, chin, etc., except for the three designated locations, so as not to be stained with saliva and affect the quality of specimen collection.

Covid Mouth Swab Test Pre-harvest preparation

Routine screening:

Work clothes, medical protective face shield, work cap, gloves, isolation gown, goggles (anti-fog) or face shield.

Influenza or suspected cases:

Wear work clothes, medical protective masks, work caps, gloves, isolation gowns or protective clothing, goggles (anti-fog) or protective face shields, and add shoe covers or boot covers if necessary.

Order of protective clothing:

Work caps that do not need to be worn. → Protective masks (Wearable head-mounted type and a tightness test should be performed after wearing them.)→ No shoes protective clothing (Boot covers should be added instead of foot protective clothing.) → Surgical gloves. → Protective screen or goggles.

Employee Registration Protection:

Tooling or isolation gown. → Medical-surgical mask or medical protective face shield. → Disposable work cap.

Protective clothing should be replaced every 4 hours and should be replaced in time if there is moisture or pollution.

Supplies preparation: Throat swab sampling sleeve, tongue depressor, inspection sheet and barcode, transport bag or refrigerator, 75% alcohol, pen.

Nucleic acid collection

1. We asked the examinee to tilt his head slightly, open his mouth.

And lift the upper jaw vertically to expose the posterior pharyngeal wall.

2. Use the front end of a sterile long cotton swab to quickly rub up and down 3-5 times on the bilateral pharyngeal tonsils.

And 3-5 times on the upper and lower sides of the posterior pharyngeal wall.

3. After scraping, open the sampling tube. Insert the front end of the sample vertically into the sampling tube. Insert the sampling tube. Break the sampling tube to expose the outer part of the tube. And tighten the cap.

Place the sampling tube in a biosafety sealed bag, mark the name and other information on the sampling tube, and complete the sampling.

Notice:

1. When sampling with the Covid Mouth Swab Test, it is best not to call “ah”, because once the sampled person is a positive patient, he will shout “ah”, exhale the virus in large quantities, and form aerosols in the sampling area.

When sampling, we advise patients to open their mouths and not yell or take deep breaths.

2. During the sampling process, one person collects and one person disinfects.

When the sampler holds the cotton swab, try to take it as far as possible.

3. A large number of samplers collect oropharyngeal swabs face-to-face with the sampled person.

Therefore, during the sampling process, the breath exhaled by the patient can easily and directly pose a great threat to the medical staff.

To reduce the risk of the sampler, we recommend that healthcare workers sample at a 45-60 degree angle to reduce risk.

End of Swab Test sampling

1. Spray and disinfect the generated medical waste layer by layer, and tie the gooseneck double medicine bag tightly to ensure that the seal is tight, has no damage, and has no leakage. Do not squeeze the contents of the medical waste bag. Annotation generates point information.

2. The order of unprotected items: hand hygiene → take off the protective face shield or goggles → hand hygiene → take off the protective clothing (take off the boot cover together) → hand hygiene, take off gloves, hand hygiene → take off the protective mask and Disposable work cap → hand hygiene.